Solid walls and damp: why traditional construction matters
Solid walls and damp are a recurring concern in older Welsh homes. Many of the buildings I inspect across Wales are older solid wall properties. In fact, a large proportion of my inspections are carried out on this type of building, which is particularly common throughout South and West Wales.
Unfortunately, many of these older buildings have been modernised over the years using materials that are not breathable. Common examples include cement based renders and mortars, modern masonry paints, silicone sealants, plastic membranes and gypsum plasters.
Traditionally, these buildings were constructed using porous lime-based materials that allowed moisture to move naturally through the walls and floors. They were also designed to accommodate a degree of movement and were generally well suited to the wet and often exposed conditions experienced across much of Wales.
As building methods and materials changed, many older properties were altered using materials that are incompatible with their original construction. While often installed with good intentions, these modern materials can restrict breathability, trap moisture within the structure and, in some cases, lead to significant damage to the building fabric.
The diagram below highlights some of the common issues that can affect these properties, including dampness, timber decay and the deterioration of traditional building materials.
Text explanation of the wall diagram
Breathable solid wall: Rain and moisture rising from the ground can enter the wall. Breathable lime plaster on both sides allows moisture to evaporate. The arrows show moisture moving out through the wall and floor and venting to the outside.
Wall restricted by modern materials: A broken roof tile and blocked gutters allow water into the building. Cracked, impervious cement on the outside and impervious plaster inside restrict drying. Concrete or tarmac outside, an injected damp-proof course (DPC), and an internal concrete slab over a damp-proof membrane further restrict moisture movement. The diagram shows moisture trapped in the wall and rotting timbers where the upper floor meets it.
Observed near Haverfordwest: exposed stonework
The photo below shows a property near Haverfordwest that dates from the early 19th century and is made of solid stone. You can see where the rear elevation has been coated with a roughcast cement render and sections have become detached and fallen away, exposing the original stonework beneath. Unsurprisingly, the internal walls were very damp, which is often the case when non-breathable materials are used.
What this means for a buyer
The visible loss of render exposes the wall beneath. It also prompts questions about how the remaining finishes interact with the original construction. The photograph alone does not establish the condition of the whole wall or specify the repairs required.
Choosing the next step
For an older or altered property, discuss whether a Level 3 Survey is appropriate. Share any known damp history and previous works when requesting a quote so the inspection can be planned around the building.
Property surveys in Pembrokeshire · Discuss an older property with James
